29 CFR 1910 · General Industry · Subpart H

1910.107(b)(8): Spray Booth Separation

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Each spray booth must be separated from other operations by not less than 3 feet, or by a greater distance, or by a partition or wall that reduces the danger of hazardous operations being next to each other.

Key takeaways

  • 1910.107(b)(8) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 12 times in the last 3 years, in 12 inspections, with $18,125 in current penalties.
  • Most citations: VA (4), MD (2), TN (1).
  • Related part: 1910.107(b) Spray booths (559 citations).
  • Free 5-minute toolbox talk for your crew below.
12citations, 3 years
$18,125current penalties
12inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.107(b)(8) ("Separation of operations") is one requirement inside 1910.107 Spray finishing using flammable and combustible materials, an OSHA general industry standard (Part 1910, Subpart H). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(8) Separation of operations. Each spray booth shall be separated from other operations by not less than 3 feet, or by a greater distance, or by such partition or wall as to reduce the danger from juxtaposition of hazardous operations. See also paragraph (c)(1) of this section. 12 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.107.

Where and how often it was cited

YearCitations
20231
20244
20254
20263

Top states: VA (4), MD (2), TN (1), HI (1), TX (1)

Largest penalties

EmployerLocationPenalty for this rule
ZEPHYR3 LLCPORT SAINT LUCIE, FL$5,627
KOLLMORGEN CORPORATIONRADFORD, VA$4,291
RPM INDUSTRIAL COATINGS GROUP, INC.MILLERSBURG, OH$4,257
TEXAN POWDER COATING LLCALVIN, TX$2,420
DEJANA TRUCK & UTILITY EQUIPMENT COMPANY, LLCBALTIMORE, MD$1,026

Free toolbox talk

A 5-minute crew talk on 1910.107(b)(8), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.107(b)(8).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How far must a spray booth be from other operations?

Not less than 3 feet, or a greater distance, or separated by a partition or wall.

Why separate spray booths?

To reduce the danger from hazardous operations being next to each other.

Can a wall be used instead of distance?

Yes, a partition or wall that reduces the danger.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba