29 CFR 1926 · Construction · Subpart Z

1926.1101(k)(9)(v): Training for Class III Asbestos Workers

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers must train Class III asbestos workers in a course consistent with EPA requirements for school maintenance and custodial staff at 40 CFR 763.92(a)(2), including hands-on training, lasting at least 16 hours. If the competent person decides the EPA course does not cover the activity, training must include the elements in paragraph (k)(9)(viii), the related work practices and controls in paragraph (g), and hands-on practice for each material disturbed.

Key takeaways

  • 1926.1101(k)(9)(v) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Z).
  • OSHA cited it 10 times in the last 3 years, in 10 inspections, with $51,325 in current penalties.
  • Most citations: NJ (3), MD (2), OR (2).
  • Related part: 1926.1101(k) Communication of hazards (631 citations).
  • Free 5-minute toolbox talk for your crew below.
10citations, 3 years
$51,325current penalties
10inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1101(k)(9)(v) is one requirement inside 1926.1101 Asbestos, an OSHA construction standard (Part 1926, Subpart Z). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(v) Training for Class III employees shall be consistent with EPA requirements for training of local education agency maintenance and custodial staff as set forth at 40 CFR 763.92(a)(2). Such a course shall also include “hands-on” training and shall take at least 16 hours. Exception: For Class III operations for which the competent person determines that the EPA curriculum does not adequately cover the training needed to perform that activity, training shall include as a minimum all the elements included in paragraph (k)(9)(viii) of this section and in addition, the specific work practices and engineering controls set forth in paragraph (g) of this section which specifically relate to that activity, and shall include “hands-on” training in the work practices applicable to each category of material that the employee disturbs. 10 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1101.

Where and how often it was cited

YearCitations
20231
20245
20252
20262

Top states: NJ (3), MD (2), OR (2), VA (2), MA (1)

Largest penalties

EmployerLocationPenalty for this rule
LIVE NATION ENTERTAINMENT, INC.BOSTON, MA$16,550
ASHLAND SPECIALTY INGREDIENTSHOPEWELL, VA$10,325
317738618 - STATE OF OREGON OREGON STATE UNIVERSITYCORVALLIS, OR$9,000
WILSON AVENUE SCHOOLNEWARK, NJ$7,000
PATERSON DEPT OF PUBLIC WORKSPATERSON, NJ$4,950

Free toolbox talk

A 5-minute crew talk on 1926.1101(k)(9)(v), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How long is Class III asbestos training?

At least 16 hours, including hands-on training.

What standard does the course follow?

EPA requirements for training local education agency maintenance and custodial staff at 40 CFR 763.92(a)(2).

What if the EPA course does not fit our work?

If the competent person decides it does not cover the activity, training must include the elements of paragraph (k)(9)(viii), the specific practices and controls in paragraph (g), and hands-on training for each category of material disturbed.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba