29 CFR 1926 · Construction · Subpart O

1926.600(a)(5): Safety Glass in Equipment Cabs

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers must make sure all cab glass on machines covered by this subpart is safety glass, or equivalent, that introduces no visible distortion affecting safe operation of the machine.

Key takeaways

  • 1926.600(a)(5) is part of OSHA's construction standards (29 CFR Part 1926, Subpart O).
  • OSHA cited it 17 times in the last 3 years, in 17 inspections, with $21,808 in current penalties.
  • Most citations: MI (11), NY (1), AZ (1).
  • Related part: 1926.600(a) General requirements (111 citations).
  • Free 5-minute toolbox talk for your crew below.
17citations, 3 years
$21,808current penalties
17inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.600(a)(5) is one requirement inside 1926.600 Equipment, an OSHA construction standard (Part 1926, Subpart O). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(5) All cab glass shall be safety glass, or equivalent, that introduces no visible distortion affecting the safe operation of any machine covered by this subpart. 17 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.600.

Where and how often it was cited

YearCitations
20248
20255
20264

Top states: MI (11), NY (1), AZ (1), MN (1), TX (1)

Largest penalties

EmployerLocationPenalty for this rule
INTERNATIONAL EAGLE ENTERPRISES, INC.EL PASO, TX$10,000
HUTCH PAVING INCWHITMORE LAKE, MI$7,000
HOYING & HOYING BUILDERS, INC.SIDNEY, OH$2,980
JEREMIAH CAMERONWOODSTOCK, VA$1,008
107913 - PRATT CONSTRUCTION INC DBA PRATT HOMESLAKE ELMO, MN$420

Free toolbox talk

A 5-minute crew talk on 1926.600(a)(5), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.600(a)(5).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What kind of glass must equipment cabs have?

All cab glass must be safety glass, or equivalent, under 1926.600(a)(5).

Can cab glass be distorted?

No. The glass must introduce no visible distortion that affects safe operation of the machine.

Which machines does this cover?

Any machine covered by Subpart O, Motor Vehicles, Mechanized Equipment, and Marine Operations.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba