29 CFR 1910 · General Industry · Subpart H

1910.106(e)(6)(i): Preventing Ignition of Flammable Vapors

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

Employers must take adequate precautions to prevent the ignition of flammable vapors. Ignition sources include, but are not limited to, open flames, lightning, smoking, cutting and welding, hot surfaces, frictional heat, static, electrical and mechanical sparks, spontaneous ignition including heat-producing chemical reactions, and radiant heat.

Key takeaways

  • 1910.106(e)(6)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart H).
  • OSHA cited it 72 times in the last 3 years, in 72 inspections, with $267,703 in current penalties.
  • Most citations: MD (10), PA (8), CT (6).
  • Related part: 1910.106(e) Industrial plants (599 citations).
  • Free 5-minute toolbox talk for your crew below.
72citations, 3 years
$267,703current penalties
72inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.106(e)(6)(i) ("General") is one requirement inside 1910.106 Flammable liquids, an OSHA general industry standard (Part 1910, Subpart H). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) General. Adequate precautions shall be taken to prevent the ignition of flammable vapors. Sources of ignition include but are not limited to open flames; lightning; smoking; cutting and welding; hot surfaces; frictional heat; static, electrical, and mechanical sparks; spontaneous ignition, including heat-producing chemical reactions; and radiant heat. 72 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.106.

Where and how often it was cited

YearCitations
20235
202429
202525
202613

Top states: MD (10), PA (8), CT (6), VA (6), NJ (5)

Largest penalties

EmployerLocationPenalty for this rule
AL BUYS JUNK CARS, INC.ORLANDO, FL$16,550
HAMMER INTERMEDIATE CO LLCDENVER, CO$16,550
ENERFIN RESOURCES COMPANYDUSTIN, OK$13,902
ENTERPRISE LOGISTIC SERVICES LLCPETAL, MS$13,394
PARKER-LORD CORPORATIONSAEGERTOWN, PA$12,059

Free toolbox talk

A 5-minute crew talk on 1910.106(e)(6)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.106(e)(6)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What does the rule require?

Adequate precautions to prevent the ignition of flammable vapors.

What counts as an ignition source?

Open flames, lightning, smoking, cutting and welding, hot surfaces, frictional heat, static, electrical and mechanical sparks, spontaneous ignition, and radiant heat, among others.

Is that list complete?

No. The rule says sources of ignition include but are not limited to those listed.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top