29 CFR 1910 · General Industry

1910.1200(g): Safety data sheets (SDS)

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 7 min read

In plain words:

Chemical manufacturers and importers must provide a safety data sheet (SDS) for each hazardous chemical they make or import, and employers must have an SDS in the workplace for each hazardous chemical they use. An SDS must be in English (other languages may be kept as well) and follow 16 numbered sections in a set order, from identification to other information. Employers must keep SDSs readily accessible to employees in their work areas during each work shift.

Key takeaways

  • 1910.1200(g) is part of OSHA's general industry standards (29 CFR Part 1910).
  • OSHA cited it 4,329 times in the last 3 years, in 4,303 inspections, with $2,380,886 in current penalties.
  • 37 deaths are linked to inspections that cited this rule.
  • Most citations: MD (613), TN (373), OR (289).
  • Related part: 1910.1200(g)(8) (2,478 citations).
  • Free 5-minute toolbox talk for your crew below.
4,329citations, 3 years
$2,380,886current penalties
4,303inspections
37linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.1200(g) ("Safety data sheets") is one requirement inside 1910.1200 Hazard communication, an OSHA general industry standard (Part 1910). It includes 38 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(g) Safety data sheets. 4,329 citations

(1) Chemical manufacturers and importers shall obtain or develop a safety data sheet for each hazardous chemical they produce or import. Employers shall have a safety data sheet in the workplace for each hazardous chemical which they use. Open (g)(1) 1,780 citations

(2) The chemical manufacturer or importer shall ensure that the safety data sheet is in English (although the employer may maintain copies in other languages as well), and includes at least the following section numbers and headings, and associated information under each heading, in the order listed (see appendix D to this section, for the specific content of each section of the safety data sheet): Open (g)(2) 16 citations

(i) Section 1, Identification; Open (g)(2)(i) 1 citations

(ii) Section 2, Hazard(s) identification; Open (g)(2)(ii) 2 citations

(iii) Section 3, Composition/information on ingredients; Open (g)(2)(iii) 1 citations

(iv) Section 4, First-aid measures;

(v) Section 5, Fire-fighting measures;

(vi) Section 6, Accidental release measures; Open (g)(2)(vi)

(vii) Section 7, Handling and storage;

(viii) Section 8, Exposure controls/personal protection; Open (g)(2)(viii) 1 citations

(ix) Section 9, Physical and chemical properties; 1 citations

(x) Section 10, Stability and reactivity; Open (g)(2)(x) 1 citations

(xi) Section 11, Toxicological information. Open (g)(2)(xi) 1 citations

(xii) Section 12, Ecological information; Open (g)(2)(xii)

(xiii) Section 13, Disposal considerations;

(xiv) Section 14, Transport information;

(xv) Section 15, Regulatory information; and

(xvi) Section 16, Other information, including date of preparation or last revision.

To be consistent with the GHS, an SDS must also include the headings in paragraphs (g)(2)(xii) through (g)(2)(xv) of this section in order.

OSHA will not be enforcing information requirements in sections 12 through 15, as these areas are not under its jurisdiction.

(3) If no relevant information is found for any sub-heading within a section on the safety data sheet, the chemical manufacturer, importer or employer preparing the safety data sheet shall mark it to indicate that no applicable information was found.

(4) Where complex mixtures have similar hazards and contents (i.e., the chemical ingredients are essentially the same, but the specific composition varies from mixture to mixture), the chemical manufacturer, importer or employer may prepare one safety data sheet to apply to all of these similar mixtures. Open (g)(4)

(5) The chemical manufacturer, importer or employer preparing the safety data sheet shall ensure that the information provided accurately reflects the scientific evidence used in making the hazard classification. If the chemical manufacturer, importer or employer preparing the safety data sheet becomes newly aware of any significant information regarding the hazards of a chemical, or ways to protect against the hazards, this new information shall be added to the safety data sheet within three months. If the chemical is not currently being produced or imported, the chemical manufacturer or importer shall add the information to the safety data sheet before the chemical is introduced into the workplace again. Open (g)(5) 4 citations

(6) Open (g)(6) 2 citations

(i) Chemical manufacturers or importers shall ensure that distributors and employers are provided an appropriate safety data sheet with their initial shipment, and with the first shipment after a safety data sheet is updated; Open (g)(6)(i) 1 citations

(ii) The chemical manufacturer or importer shall either provide safety data sheets with the shipped containers or send them to the distributor or employer prior to or at the time of the shipment; Open (g)(6)(ii)

(iii) If the safety data sheet is not provided with a shipment that has been labeled as a hazardous chemical, the distributor or employer shall obtain one from the chemical manufacturer or importer as soon as possible; and, 1 citations

(iv) The chemical manufacturer or importer shall also provide distributors or employers with a safety data sheet upon request. Open (g)(6)(iv)

(7) Open (g)(7) 3 citations

(i) Distributors shall ensure that safety data sheets, and updated information, are provided to other distributors and employers with their initial shipment and with the first shipment after a safety data sheet is updated; 3 citations

(ii) The distributor shall either provide safety data sheets with the shipped containers, or send them to the other distributor or employer prior to or at the time of the shipment;

(iii) Retail distributors selling hazardous chemicals to employers having a commercial account shall provide a safety data sheet to such employers upon request, and shall post a sign or otherwise inform them that a safety data sheet is available; Open (g)(7)(iii)

(iv) Wholesale distributors selling hazardous chemicals to employers over-the-counter may also provide safety data sheets upon the request of the employer at the time of the over-the-counter purchase, and shall post a sign or otherwise inform such employers that a safety data sheet is available;

(v) If an employer without a commercial account purchases a hazardous chemical from a retail distributor not required to have safety data sheets on file (i.e., the retail distributor does not have commercial accounts and does not use the materials), the retail distributor shall provide the employer, upon request, with the name, address, and telephone number of the chemical manufacturer, importer, or distributor from which a safety data sheet can be obtained;

(vi) Wholesale distributors shall also provide safety data sheets to employers or other distributors upon request; and,

(vii) Chemical manufacturers, importers, and distributors need not provide safety data sheets to retail distributors that have informed them that the retail distributor does not sell the product to commercial accounts or open the sealed container to use it in their own workplaces.

(8) The employer shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s). (Electronic access and other alternatives to maintaining paper copies of the safety data sheets are permitted as long as no barriers to immediate employee access in each workplace are created by such options.) Open (g)(8) 2,478 citations

(9) Where employees must travel between workplaces during a workshift, i.e., their work is carried out at more than one geographical location, the safety data sheets may be kept at the primary workplace facility. In this situation, the employer shall ensure that employees can immediately obtain the required information in an emergency. Open (g)(9) 6 citations

(10) Safety data sheets may be kept in any form, including as operating procedures, and may be stored in such a way to cover groups of hazardous chemicals in a work area where it may be more appropriate to address the hazards of a process rather than individual hazardous chemicals. However, the employer shall ensure that in all cases the required information is provided for each hazardous chemical, and is readily accessible during each work shift to employees when they are in their work area(s). Open (g)(10) 18 citations

(11) Safety data sheets shall also be made readily available, upon request, to designated representatives, the Assistant Secretary, and the Director, in accordance with the requirements of § 1910.1020(e). Open (g)(11) 22 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.1200.

Injuries linked to this rule

37 deaths are linked to inspections where OSHA cited 1910.1200(g).

Two employees are fatally injured when struck by falling fie
2025-02-28 · Fatal · CATONSVILLE, MD

At 11:30 a.m. on February 28, 2025, Employee #1 and Employee #2 and Coworker #1 and Coworker #2 , were applying CTS Cement Rapid Set Mortar Mix on an exposed fieldstone foundation wall to reinforce the deteriorating wall. The crew was working inside a trench…

See all 37 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
2023292
20241,484
20251,518
20261,035

Top states: MD (613), TN (373), OR (289), NY (251), CT (246)

Largest penalties

EmployerLocationPenalty for this rule
ACCURATE ENERGETIC SYSTEMS, LLCMC EWEN, TN$140,000
DANA CONTAINER, INC.PAULSBORO, NJ$70,000
RALEY'SRENO, NV$47,292
RFX2025XTN976X0045 - MERCURY SYSTEMS, INC.PHOENIX, AZ$16,550
GENERAL DYNAMICS ORDNANCE AND TACTICAL SYSTEMS, INC.HAMPTON, AR$16,131

Free toolbox talk

A 5-minute crew talk on 1910.1200(g), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How many sections does an SDS have?

Sixteen, in a set order: identification, hazards, composition, first aid, fire-fighting, accidental release, handling and storage, exposure controls and PPE, physical and chemical properties, stability and reactivity, toxicology, ecology, disposal, transport, regulatory and other information. OSHA does not enforce sections 12 through 15.

Can our SDSs be in Spanish?

The SDS must be in English, but the employer may keep copies in other languages as well.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top