29 CFR 1910 · General Industry · Subpart I

1910.134(h)(2)(i): Protecting Stored Respirators

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

Employers must store all respirators so they are protected from damage, contamination, dust, sunlight, extreme temperatures, too much moisture and damaging chemicals. Respirators must also be packed or stored so the facepiece and exhalation valve do not get bent or deformed. Proper storage keeps the respirator sealing and working when it is needed.

Key takeaways

  • 1910.134(h)(2)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart I).
  • OSHA cited it 447 times in the last 3 years, in 447 inspections, with $284,400 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Most citations: TN (63), OR (35), VA (31).
  • Related part: 1910.134(h) Maintenance and care of respirators (804 citations).
  • Free 5-minute toolbox talk for your crew below.
447citations, 3 years
$284,400current penalties
447inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.134(h)(2)(i) is one requirement inside 1910.134 Respiratory protection, an OSHA general industry standard (Part 1910, Subpart I). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) All respirators shall be stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals, and they shall be packed or stored to prevent deformation of the facepiece and exhalation valve. 447 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.134.

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1910.134(h)(2)(i).

Employee collapses due to severe asthma attack and later die
2024-05-07 · Fatal · TIMBER LAKE, SD

At 8:30 a.m. on May 7, 2024, Employee #1 was preparing to sand an epoxy patch when they exited the area, reporting difficulty breathing. The employee collapsed shortly afterward. Despite immediate attention, the employee later died from a severe asthma attack. The cause of the…

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
202330
2024171
2025144
2026102

Top states: TN (63), OR (35), VA (31), NV (23), TX (22)

Largest penalties

EmployerLocationPenalty for this rule
CRASH CHAMPIONS, LLCOLATHE, KS$19,506
FLEETPRIDE INC.CORPUS CHRISTI, TX$16,550
SMITH-MIDLAND CORPORATIONMIDLAND, VA$12,135
LMI FINISHING, INC.CATOOSA, OK$11,524
ARSI ASBESTOS REMOVAL SERVICES INC.MOBERLY, MO$11,292

Free toolbox talk

A 5-minute crew talk on 1910.134(h)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.134(h)(2)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What must respirators be protected from in storage?

Damage, contamination, dust, sunlight, extreme temperatures, excessive moisture and damaging chemicals.

Why does packing matter?

Respirators must be packed or stored to prevent deformation of the facepiece and exhalation valve.

Does this apply to all respirators?

Yes. This paragraph applies to all respirators.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top