29 CFR 1910 · General Industry · Subpart J

1910.147(d)(4)(i): Authorized Employees Attach Lockout or Tagout Devices

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Authorized employees must attach a lockout or tagout device to each energy isolating device. This is the step that physically keeps machines and equipment from being turned back on while someone works on them.

Key takeaways

  • 1910.147(d)(4)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart J).
  • OSHA cited it 285 times in the last 3 years, in 275 inspections, with $1,208,700 in current penalties.
  • 11 deaths are linked to inspections that cited this rule.
  • Most citations: WI (44), TX (37), FL (25).
  • Related part: 1910.147(d) Application of control (1,368 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.147(d)(4)(i) ↓

285citations, 3 years
$1,208,700current penalties
275inspections
11linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.147(d)(4)(i) is one requirement inside 1910.147 The control of hazardous energy (lockout/tagout), an OSHA general industry standard (Part 1910, Subpart J). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees. 285 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.147.

See every company cited for this rule.

Export the list: 275 inspections cited 1910.147(d)(4)(i) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

11 deaths are linked to inspections where OSHA cited 1910.147(d)(4)(i).

Employee is fatally injured by load transfer machine gantry
2025-01-06 · Fatal · DAKOTA CITY, NE

At approximately 8:03 a.m. on January 6, 2025, Employee #1 was performing maintenance and servicing on a Newcastle Load Transfer machine, serial number 14134. Prior to the incident, adjustments had been made to the pallet transfer plate to address operational issues. Employee #1, after the…

See all 11 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20236
2024100
202593
202686

Top states: WI (44), TX (37), FL (25), NE (19), NJ (18)

Largest penalties

EmployerLocationPenalty for this rule
CHANEY MATERIALS, LLCCHRISTIANSBURG, VA$68,825
BROWN PAPER GOODS COMPANYCOPPELL, TX$16,550
MCWANE INC.TYLER, TX$16,550
PL SOLUTIONS GROUP, LLCSWEDESBORO, NJ$16,550
WALMART DISTRIBUTION CENTER #7036SEALY, TX$16,550

Free toolbox talk

A 5-minute crew talk on 1910.147(d)(4)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.147(d)(4)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who puts the lock or tag on the energy isolating device?

Authorized employees must affix the lockout or tagout devices.

Does every energy isolating device need its own lock or tag?

Yes. The rule says devices must be affixed to each energy isolating device.

What is an energy isolating device?

It is the switch, valve, breaker or similar part that stops energy from reaching the equipment, and it is where the lock or tag goes.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top