29 CFR 1910 · General Industry · Subpart N

1910.178(l)(4)(ii)(E): Forklift Refresher Training After Workplace Changes

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 3 min read

In plain words:

Employers must provide refresher training to a powered industrial truck operator when a condition in the workplace changes in a way that could affect safe operation of the truck.

Key takeaways

  • 1910.178(l)(4)(ii)(E) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart N).
  • OSHA cited it 11 times in the last 3 years, in 11 inspections, with $57,362 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: TX (3), OH (2), ND (1).
  • Related part: 1910.178(l) (5,743 citations).
  • Free 5-minute toolbox talk for your crew below.
11citations, 3 years
$57,362current penalties
11inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.178(l)(4)(ii)(E) is one requirement inside 1910.178 Powered industrial trucks, an OSHA general industry standard (Part 1910, Subpart N). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(E) A condition in the workplace changes in a manner that could affect safe operation of the truck. 11 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.178.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.178(l)(4)(ii)(E).

Employee is killed when pinned between tires by forklift
2024-05-21 · Fatal · BURLINGTON, IA

At 1:46 p.m. on May 21, 2024, Employee #1, employed by a tire company, was placing stickers on stacks of 850 x 50 R32 tires in the loading area. A coworker, operating a Hyundai forklift, was unloading a stack of three 850 x 50 R32…

Where and how often it was cited

YearCitations
20247
20253
20261

Top states: TX (3), OH (2), ND (1), IA (1), IN (1)

Largest penalties

EmployerLocationPenalty for this rule
INDUSTRIAL SERVICE CORPORATIONBURLINGTON, IA$12,500
LINEAGE LOGISTICS HOLDINGS LLCFRIONA, TX$12,098
U.S. POSTAL SERVICEALBANY, NY$10,758
DACOTAH PAPER CO.FARGO, ND$8,711
SYSCO NORTH TEXASLEWISVILLE, TX$4,148

Free toolbox talk

A 5-minute crew talk on 1910.178(l)(4)(ii)(E), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.178(l)(4)(ii)(E).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Does a workplace change require forklift refresher training?

Yes, when a condition changes in a manner that could affect safe operation of the truck.

What kind of changes count?

Any change in workplace conditions that could affect safe truck operation.

Who gets the refresher training?

The operator affected by the change.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top