29 CFR 1910 · General Industry · Subpart N

1910.184(i)(1): Marking Synthetic Web Slings

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 21, 2026 3 min read

In plain words:

Employers must make sure each synthetic web sling is marked or coded to show its rated capacities for each type of hitch and the type of synthetic web material.

Key takeaways

  • 1910.184(i)(1) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart N).
  • OSHA cited it 28 times in the last 3 years, in 28 inspections, with $24,129 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: TN (7), CT (3), AZ (3).
  • Related part: 1910.184(i) Synthetic web slings (91 citations).
  • Free 5-minute toolbox talk for your crew below.
28citations, 3 years
$24,129current penalties
28inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.184(i)(1) ("Sling identification") is one requirement inside 1910.184 Slings, an OSHA general industry standard (Part 1910, Subpart N). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) Sling identification. Each sling shall be marked or coded to show the rated capacities for each type of hitch and type of synthetic web material. 28 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.184.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.184(i)(1).

Employee dies of head injuries when struck by falling steel
2024-06-11 · Fatal · MIDDLESEX, NJ

At 7:45 a.m. on June 11, 2024, an employee working as a forklift operator for a stainless-steel manufacturer was assisting a coworker, also a forklift operator,by directing movement of an 800-pound steel beam. The strap holding the beam ripped and the beam struck the employee.…

Where and how often it was cited

YearCitations
20232
202411
20259
20266

Top states: TN (7), CT (3), AZ (3), VA (2), OR (2)

Largest penalties

EmployerLocationPenalty for this rule
KAIROS SPECIALTY METALS CORPMOUNT SUMMIT, IN$4,900
AVANI MARBLE & GRANITE INC.COLUMBUS, OH$4,138
RFX2024XT3633X0166 - HYDRAULIC REPAIR AND SUPPLY LLCTUCSON, AZ$3,457
FARIS PROPERTIES, LLCKINGSPORT, TN$3,200
C.H.A.T. OF PA, INC.ERIE, PA$2,954

Free toolbox talk

A 5-minute crew talk on 1910.184(i)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.184(i)(1).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What must a synthetic web sling be marked with?

The rated capacities for each type of hitch and the type of synthetic web material.

Can a code be used instead of a mark?

Yes. The sling may be marked or coded.

Does every sling need identification?

Yes, each sling.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top