29 CFR 1910 · General Industry · Subpart N

1910.184(i)(9)(iii): Web Sling Snags, Punctures, Tears or Cuts

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 21, 2026 2 min read

In plain words:

This item lists snags, punctures, tears or cuts as damage that requires a synthetic web sling to be removed from service.

Key takeaways

  • 1910.184(i)(9)(iii) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart N).
  • OSHA cited it 43 times in the last 3 years, in 43 inspections, with $89,039 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: OR (5), MN (5), CT (4).
  • Related part: 1910.184(i) Synthetic web slings (91 citations).
  • Free 5-minute toolbox talk for your crew below.
43citations, 3 years
$89,039current penalties
43inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.184(i)(9)(iii) is one requirement inside 1910.184 Slings, an OSHA general industry standard (Part 1910, Subpart N). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(iii) Snags, punctures, tears or cuts; 43 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.184.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.184(i)(9)(iii).

Employee dies while moving load and crushed by falling windo
2024-04-18 · Fatal · SAN ANTONIO, TX

At 8:40 a.m. on April 18, 2024, an employee working for a glass and glazing contractor was attempting to maneuver a 3-ton overhead crane to unsecured windowframes. The window frames were staged in for metal fabrication prep in the assembly area. While moving one of…

Where and how often it was cited

YearCitations
20232
202415
202518
20268

Top states: OR (5), MN (5), CT (4), MD (4), TN (4)

Largest penalties

EmployerLocationPenalty for this rule
KASPAR RANCH HAND EQUIPMENT LLCSHINER, TX$15,606
KIOTI TRACTORSMEXIA, TX$12,768
STRATIS VISUALS LLCTORRINGTON, CT$9,931
OMEGA STEEL, INC.BLOOMINGDALE, GA$7,100
317736879 - PCC STRUCTURALS INCREDMOND, OR$4,841

Free toolbox talk

A 5-minute crew talk on 1910.184(i)(9)(iii), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.184(i)(9)(iii).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What damage does this item cover?

Snags, punctures, tears or cuts in synthetic web slings.

What must be done with a sling that has this damage?

It must be removed from service under 1910.184(i)(9).

Can a small cut be ignored?

No. The rule lists cuts without a size limit.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top