1910.252(c)(6)(ii): Indoor Welding with Zinc
Indoors, welding or cutting involving zinc-bearing base or filler metals coated with zinc-bearing materials must follow paragraph (c)(3) of 1910.252.
Key takeaways
- 1910.252(c)(6)(ii) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart Q).
- OSHA cited it 13 times in the last 3 years, in 13 inspections, with $18,078 in current penalties.
- Most citations: MN (3), MI (3), IL (1).
- Related part: 1910.252(c) Health protection and ventilation (72 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1910.252(c)(6)(ii) ("Indoors") is one requirement inside 1910.252 General requirements, an OSHA general industry standard (Part 1910, Subpart Q). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(ii) Indoors. Indoors, welding or cutting involving zinc-bearing base or filler metals coated with zinc-bearing materials shall be done in accordance with paragraph (c)(3) of this section. 13 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.252.
Where and how often it was cited
| Year | Citations |
|---|---|
| 2024 | 2 |
| 2025 | 4 |
| 2026 | 7 |
Top states: MN (3), MI (3), IL (1), PA (1), NM (1)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| GLOBAL FINISHING SOLUTIONS, LLC | OSSEO, WI | $6,753 |
| ACS MANUFACTURING, INC. | CLEARFIELD, UT | $2,940 |
| SECURITY DOOR & HARDWARE CO. | URBANA, IL | $2,581 |
| RICHARD R PUCCI & ASSOCIATES | WARMINSTER, PA | $1,929 |
| 108283 - NORTHLAND CONSTRUCTION - FENCE LLC | ANOKA, MN | $1,600 |
Free toolbox talk
A 5-minute crew talk on 1910.252(c)(6)(ii), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.252(c)(6)(ii).
Related parts of this rule
- 1910.252(c) Health protection and ventilation 72 citations
- 1910.252(c)(1) General 33 citations
- 1910.252(c)(1)(iv) Hazard communication 25 citations
- 1910.252(c)(2) Ventilation for general welding and cutting 17 citations
- 1910.252(c)(2)(i) General 14 citations
- 1910.252(c)(6) Zinc 13 citations
- 1910.252(c)(4) Ventilation in confined spaces 4 citations
- 1910.252(c)(11)(i) Manufacturer's instructions 3 citations
- 1910.252(c)(11) Cleaning compounds 3 citations
- 1910.252(c)(10) Mercury
- 1910.252(c)(9) Cadmium
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
What does this paragraph require?
Indoor welding or cutting involving zinc-bearing metals must be done in accordance with paragraph (c)(3).
Does this apply outdoors?
This paragraph covers indoor work.
Which standard is this?
29 CFR 1910.252, welding, cutting and brazing.
About this page
Sources
- 29 CFR 1910.252 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-24
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.