29 CFR 1910 · General Industry · Subpart R

1910.268(j)(3): Aerial Platform Clearance From Power Lines

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Telecommunications vehicle-mounted elevating and rotating work platforms must not be operated with any conductive part of the equipment closer to exposed energized power lines than the clearances in Table R-2.

Key takeaways

  • 1910.268(j)(3) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
  • OSHA cited it 6 times in the last 3 years, in 6 inspections, with $14,000 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Related part: 1910.268(j) Vehicle-mounted material handling devices and other mechanical equipment (11 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.268(j)(3) ↓

6citations, 3 years
$14,000current penalties
6inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.268(j)(3) ("Vehicle-mounted elevating and rotating work platforms") is one requirement inside 1910.268 Telecommunications, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(3) Vehicle-mounted elevating and rotating work platforms. These devices shall not be operated with any conductive part of the equipment closer to exposed energized power lines than the clearances set forth in Table R-2 of this section. 6 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.268.

See every company cited for this rule.

Export the list: 6 inspections cited 1910.268(j)(3) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1910.268(j)(3).

Employee dies from electrocution while installing fiber opti
2024-10-08 · Fatal · NAVARRE, OH

At approximately 3:30 p.m. on October 8, 2024, Employee #1, a 29-year-old male technician, was installing fiber optic cable at a residential location. Employee#1 was working from an aerial bucket truck when he unexpectedly made contact with an energized 7,200-volt overhead power line. The employee…

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1910.268(j)(3), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.268(j)(3).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How close can an aerial platform get to power lines?

No conductive part may be closer to exposed energized power lines than the clearances in Table R-2.

Which equipment does this cover?

Vehicle-mounted elevating and rotating work platforms.

Where are the clearance distances listed?

In Table R-2 of 1910.268.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top