29 CFR 1910 · General Industry · Subpart R

1910.268(j): Telecom Vehicle-Mounted Equipment

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 6 min read

In plain words:

Telecommunications employers must have a competent person visually inspect vehicle-mounted material handling devices and other mechanical equipment each day it is used, and test brakes and operating systems at the start of each shift. Listed scrapers, loaders, dozers, graders and tractors need rollover protective structures meeting subpart W of part 1926, eye protection is required where flying material is generated, and aerial platforms and derrick trucks must not come closer to exposed energized lines than Table R-2 allows.

Key takeaways

  • 1910.268(j) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
  • OSHA cited it 11 times in the last 3 years, in 8 inspections, with $54,750 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Most citations: KY (4), AR (2), OH (2).
  • Related part: 1910.268(j)(3) Vehicle-mounted elevating and rotating work platforms (6 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.268(j) ↓

11citations, 3 years
$54,750current penalties
8inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.268(j) ("Vehicle-mounted material handling devices and other mechanical equipment") is one requirement inside 1910.268 Telecommunications, an OSHA general industry standard (Part 1910, Subpart R). It includes 21 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(j) Vehicle-mounted material handling devices and other mechanical equipment — 11 citations

(1) General. 2 citations

(i) The employer shall ensure that visual inspections are made of the equipment by a competent person each day the equipment is to be used to ascertain that it is in good condition. 2 citations

(ii) The employer shall ensure that tests shall be made at the beginning of each shift by a competent person to insure the vehicle brakes and operating systems are in proper working condition.

(2) Scrapers, loaders, dozers, graders and tractors.

(i) All rubber-tired, self-propelled scrapers, rubber-tired front end loaders, rubber-tired dozers, agricultural and industrial tractors, crawler tractors, crawler-type loaders, and motor graders, with or without attachments, that are used in telecommunications work shall have rollover protective structures that meet the requirements of subpart W of part 1926 of this Title.

(ii) Eye protection shall be provided and the employer shall ensure that it is used by employees when working in areas where flying material is generated.

(3) Vehicle-mounted elevating and rotating work platforms. These devices shall not be operated with any conductive part of the equipment closer to exposed energized power lines than the clearances set forth in Table R-2 of this section. Open (j)(3) 6 citations

(4) Derrick trucks and similar equipment. 3 citations

(i) This equipment shall not be operated with any conductive part of the equipment closer to exposed energized power lines than the clearances set forth in Table R-2 of this section.

(ii) When derricks are used to handle poles near energized power conductors, these operations shall comply with the requirements contained in paragraphs (b)(7) and (n)(11) of this section.

(iii) Moving parts of equipment and machinery carried on or mounted on telecommunications line trucks shall be guarded. This may be done with barricades as specified in paragraph (d)(2) of this section.

(iv) Derricks and the operation of derricks shall comply with the following requirements: 3 citations

(A) Manufacturer's specifications, load ratings and instructions for derrick operation shall be strictly observed. 1 citations

(B) Rated load capacities and instructions related to derrick operation shall be conspicuously posted on a permanent weather-resistant plate or decal in a location on the derrick that is plainly visible to the derrick operator.

(C) Prior to derrick operation the parking brake must be set and the stabilizers extended if the vehicle is so equipped. When the vehicle is situated on a grade, at least two wheels must be chocked on the downgrade side.

(D) Only persons trained in the operation of the derrick shall be permitted to operate the derrick.

(E) Hand signals to derrick operators shall be those prescribed by ANSI B30.6-1969, “Safety Code for Derricks”, which is incorporated by reference as specified in § 1910.6. 1 citations

(F) The employer shall ensure that the derrick and its associated equipment are inspected by a competent person at intervals set by the manufacturer but in no case less than once per year. Records shall be maintained including the dates of inspections, and necessary repairs made, if corrective action was required. 1 citations

(G) Modifications or additions to the derrick and its associated equipment that alter its capacity or affect its safe operation shall be made only with written certification from the manufacturer, or other equivalent entity, such as a nationally recognized testing laboratory, that the modification results in the equipment being safe for its intended use. Such changes shall require the changing and posting of revised capacity and instruction decals or plates. These new ratings or limitations shall be as provided by the manufacturer or other equivalent entity.

(H) Wire rope used with derricks shall be of improved plow steel or equivalent. Wire rope safety factors shall be in accordance with American National Standards Institute B30.6-1969.

(I) Wire rope shall be taken out of service, or the defective portion removed, when any of the following conditions exist:

(1) The rope strength has been significantly reduced due to corrosion, pitting, or excessive heat, or

(2) The thickness of the outer wires of the rope has been reduced to two-thirds or less of the original thickness, or

(3) There are more than six broken wires in any one rope lay, or

(4) There is excessive permanent distortion caused by kinking, crushing, or severe twisting of the rope.

Source: eCFR, text current as of 2026-10-15. Read all of 1910.268.

See every company cited for this rule.

Export the list: 8 inspections cited 1910.268(j) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1910.268(j).

Employee dies from electrocution while installing fiber opti
2024-10-08 · Fatal · NAVARRE, OH

At approximately 3:30 p.m. on October 8, 2024, Employee #1, a 29-year-old male technician, was installing fiber optic cable at a residential location. Employee#1 was working from an aerial bucket truck when he unexpectedly made contact with an energized 7,200-volt overhead power line. The employee…

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20232
20242
20251
20266

Top states: KY (4), AR (2), OH (2), IA (1), PR (1)

Largest penalties

EmployerLocationPenalty for this rule
MDR CONSTRUCTION, INC.DELAWARE, AR$31,250
68908 - APEX FIBER OPTICS LLCHOLMES MILL, KY$10,500
68912 - HARLAN COMMUNITY TELEVISION INCORPORATEDHOLMES MILL, KY$10,500
CITY COMMUNICATIONS LLCSAN JUAN, PR$2,500
OHIO LINE CONSTRUCTION LLCWEST MILTON, OH$0

Free toolbox talk

A 5-minute crew talk on 1910.268(j), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.268(j).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How often must telecom vehicle equipment be inspected?

A competent person must visually inspect it each day the equipment is to be used.

When must brakes and operating systems be tested?

At the beginning of each shift, by a competent person.

How close can a derrick truck get to power lines?

No conductive part may be closer to exposed energized power lines than the clearances in Table R-2.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top