1910.36(g)(2): Minimum Width of Exit Access
An exit access must be at least 28 inches wide at all points. Where only one exit access leads to an exit or exit discharge, the exit and exit discharge must be at least as wide as the exit access.
Key takeaways
- 1910.36(g)(2) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart E).
- OSHA cited it 360 times in the last 3 years, in 360 inspections, with $1,224,166 in current penalties.
- 3 deaths are linked to inspections that cited this rule.
- Most citations: PR (51), AZ (30), VA (23).
- Related part: 1910.36(g) An exit route must meet minimum height and width requirements (410 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.36(g)(2) ↓
In this article
What this rule covers
29 CFR 1910.36(g)(2) is one requirement inside 1910.36 Design and construction requirements for exit routes, an OSHA general industry standard (Part 1910, Subpart E). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(2) An exit access must be at least 28 inches (71.1 cm) wide at all points. Where there is only one exit access leading to an exit or exit discharge, the width of the exit and exit discharge must be at least equal to the width of the exit access. 360 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.36.
Export the list: 360 inspections cited 1910.36(g)(2) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moInjuries linked to this rule
3 deaths are linked to inspections where OSHA cited 1910.36(g)(2).
At 9:40 a.m. on November 20, 2024, an employee was operating a forklift outside the cattle pens at the paunch pad area, dumping dry paunch (powder texture) ontothe floor. During this time, a subcontracted employee was operating a front-end loader in close proximity, loading paunch…
Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).
Unlock with Purple BeltWhere and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 12 |
| 2024 | 139 |
| 2025 | 127 |
| 2026 | 82 |
Top states: PR (51), AZ (30), VA (23), NJ (19), MA (18)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| DOLLAR TREE STORES, INC; STORE #4457 | ANNANDALE, VA | $92,245 |
| DOLLAR TREE INC | ALEXANDRIA, VA | $84,945 |
| DOLLAR TREE, INC. | VIRGINIA BEACH, VA | $68,825 |
| TARGET CORPORATION | NORTH DARTMOUTH, MA | $53,000 |
| TARGET CORPORATION | WARWICK, RI | $43,409 |
Free toolbox talk
A 5-minute crew talk on 1910.36(g)(2), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.36(g)(2).
Related parts of this rule
- 1910.36(g) An exit route must meet minimum height and width requirements 410 citations
- 1910.36(g)(4) 41 citations
- 1910.36(g)(1) 9 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
How wide must an exit access be?
At least 28 inches (71.1 cm) wide at all points.
What if there is only one exit access?
The width of the exit and exit discharge must be at least equal to the width of the exit access.
Does the width rule apply everywhere along the route?
Yes. It applies at all points.
About this page
Sources
- 29 CFR 1910.36 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
