29 CFR 1926 · Construction · Subpart CC

1926.1425(d): Only Needed Workers in the Fall Zone

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

When a crane is landing a load, only employees needed to receive the load are permitted within the fall zone.

Key takeaways

  • 1926.1425(d) is part of OSHA's construction standards (29 CFR Part 1926, Subpart CC).
  • OSHA cited it 6 times in the last 3 years, in 6 inspections, with $39,338 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Free 5-minute toolbox talk for your crew below.
6citations, 3 years
$39,338current penalties
6inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.1425(d) ("Receiving a load") is one requirement inside 1926.1425 Keeping clear of the load, an OSHA construction standard (Part 1926, Subpart CC). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(d) Receiving a load. Only employees needed to receive a load are permitted to be within the fall zone when a load is being landed. 6 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1425.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.1425(d).

Employee dies from crush injuries when pinned by exhaust sta
2024-06-05 · Fatal · PRUDHOE BAY, AK

At 10:00 a.m. on June 5, 2024, an employee working as a pipefitter for a construction contractor was installing an exhaust stack for a turbine engine. Acoworker (the rigger) instructed the employee to begin applying gasket and adhesive material before the load was fully landed…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1926.1425(d), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.1425(d).

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who can be in the fall zone when a load lands?

Only employees needed to receive the load.

When does this apply?

When a load is being landed.

What should other workers do?

Stay out of the fall zone.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top