29 CFR 1926 · Construction · Subpart H

1926.251(e)(4): Web Sling Fittings

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 19, 2026 3 min read

In plain words:

Fittings on synthetic web slings must have a minimum breaking strength equal to that of the sling. They must also be free of all sharp edges that could in any way damage the webbing.

Key takeaways

  • 1926.251(e)(4) is part of OSHA's construction standards (29 CFR Part 1926, Subpart H).
  • OSHA cited it 6 times in the last 3 years, in 6 inspections, with $2,838 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Related part: 1926.251(e) Synthetic webbing (39 citations).
  • Free 5-minute toolbox talk for your crew below.
6citations, 3 years
$2,838current penalties
6inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.251(e)(4) ("Fittings") is one requirement inside 1926.251 Rigging equipment for material handling, an OSHA construction standard (Part 1926, Subpart H). It includes 2 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(4) Fittings. Fittings shall be: 6 citations

(i) Of a minimum breaking strength equal to that of the sling; and

(ii) Free of all sharp edges that could in any way damage the webbing. Open (e)(4)(ii) 6 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.251.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.251(e)(4).

Employee falls four stories and suffers fatality
2023-11-11 · Fatal · BRONX, NY

At 9:00 a.m. on November 11, 2023, Employee #1 was working for a general contractor. Employee #1 was moving a wall panel rigged onto knuckle crane into new position. Employee #1 fell from 5th floor onto the deck below. Employee #1 suffered a fatality from…

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1926.251(e)(4), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.251(e)(4).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How strong must fittings be?

Of a minimum breaking strength equal to that of the sling.

Can fittings have sharp edges?

No. They must be free of all sharp edges that could damage the webbing.

What slings does this cover?

Synthetic web slings.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top