29 CFR 1926 · Construction · Subpart I

1926.304(d): Guards on Portable Circular Saws

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

All portable power-driven circular saws must have guards above and below the base plate or shoe. The upper and lower guards must cover the saw to the depth of the teeth, except for the small arcs needed for bevel cuts and retraction, and the lower guard must automatically and instantly return to cover the blade when the saw is withdrawn from the work.

Key takeaways

  • 1926.304(d) is part of OSHA's construction standards (29 CFR Part 1926, Subpart I).
  • OSHA cited it 179 times in the last 3 years, in 179 inspections, with $480,739 in current penalties.
  • Most citations: TX (69), FL (35), AL (31).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.304(d) ↓

179citations, 3 years
$480,739current penalties
179inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Get your crew competent
  7. Frequently asked questions
  8. About this page

What this rule covers

29 CFR 1926.304(d) ("Guarding") is one requirement inside 1926.304 Woodworking tools, an OSHA construction standard (Part 1926, Subpart I). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position. 179 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.304.

See every company cited for this rule.

Export the list: 179 inspections cited 1926.304(d) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Where and how often it was cited

YearCitations
20234
202449
202568
202658

Top states: TX (69), FL (35), AL (31), GA (23), MD (6)

Largest penalties

EmployerLocationPenalty for this rule
ELECTRICAL CONTRACTOR INCORPORATEDDOUGLASVILLE, GA$8,711
EKO PAINTING INCHONOLULU, HI$5,760
RICARDO GOMEZSEAGOVILLE, TX$5,462
JORGE EDUARDO CORTEZDESOTO, TX$4,965
ARTURO SIFUENTESROYSE CITY, TX$4,965

Free toolbox talk

A 5-minute crew talk on 1926.304(d), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.304(d).

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Do portable circular saws need a lower guard?

Yes. Guards are required above and below the base plate or shoe.

What must the lower guard do after a cut?

Automatically and instantly return to the covering position when the tool is withdrawn from the work.

How much of the blade must the guards cover?

Both guards must cover the saw to the depth of the teeth, except the minimum arc needed for bevel cuts or retraction.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top