29 CFR 1926 · Construction · Subpart K

1926.416(a)(3): Locate Energized Power Circuits Before Work

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Before work begins, construction employers must find out by asking, looking or using instruments whether any energized power circuit, exposed or concealed, is located where the work could bring a person, tool or machine into contact with it. Where such a circuit exists, the employer must post and maintain warning signs and tell workers where the lines are, the hazards and the protective measures.

Key takeaways

  • 1926.416(a)(3) is part of OSHA's construction standards (29 CFR Part 1926, Subpart K).
  • OSHA cited it 139 times in the last 3 years, in 137 inspections, with $607,767 in current penalties.
  • 15 deaths are linked to inspections that cited this rule.
  • Most citations: TX (21), FL (13), MD (12).
  • Related part: 1926.416(a) Protection of employees (634 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.416(a)(3) ↓

139citations, 3 years
$607,767current penalties
137inspections
15linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.416(a)(3) is one requirement inside 1926.416 General requirements, an OSHA construction standard (Part 1926, Subpart K). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(3) Before work is begun the employer shall ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, is so located that the performance of the work may bring any person, tool, or machine into physical or electrical contact with the electric power circuit. The employer shall post and maintain proper warning signs where such a circuit exists. The employer shall advise employees of the location of such lines, the hazards involved, and the protective measures to be taken. 139 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.416.

See every company cited for this rule.

Export the list: 137 inspections cited 1926.416(a)(3) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

15 deaths are linked to inspections where OSHA cited 1926.416(a)(3).

One employee is fatally injured, another employee suffers sh
2025-02-25 · Fatal · CHICAGO, IL

At 8:30 a.m. on February 25, 2025, Employee #1 and Employee #2 were working as carpenters and were installing metal framing on the exterior of a multi-family dwelling. The employees were working from an Articulating Boom Lift when the boom contacted a 7,200-Volt primary overhead…

See all 15 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20231
202450
202539
202649

Top states: TX (21), FL (13), MD (12), PA (8), IL (8)

Largest penalties

EmployerLocationPenalty for this rule
SETTLE-MUTER ELECTRIC, LLCBYESVILLE, OH$33,100
107019 - KATO ROOFING INCMANKATO, MN$26,000
107649 - GREAT LAKES ROOFING AND SIDING LLCDULUTH, MN$25,000
107646 - THE DREAMERS ROOFING LLCDULUTH, MN$25,000
MARROC ROOFING LLCROCHESTER, PA$16,550

Free toolbox talk

A 5-minute crew talk on 1926.416(a)(3), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.416(a)(3).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

When must energized circuits be located?

Before work is begun.

How can the employer find energized circuits?

By inquiry, direct observation or instruments, including circuits that are concealed.

What must workers be told?

The location of the lines, the hazards involved and the protective measures to be taken.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top