29 CFR 1926 · Construction · Subpart P

1926.651(e): Stay Clear of Falling Loads

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employers must not let employees stand underneath loads handled by lifting or digging equipment, and must require employees to stand away from vehicles being loaded or unloaded. Operators may stay in vehicle cabs during loading only when the vehicle is equipped under 1926.601(b)(6) to protect them.

Key takeaways

  • 1926.651(e) is part of OSHA's construction standards (29 CFR Part 1926, Subpart P).
  • OSHA cited it 71 times in the last 3 years, in 71 inspections, with $366,161 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: FL (10), TX (8), CO (7).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.651(e) ↓

71citations, 3 years
$366,161current penalties
71inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1926.651(e) ("Exposure to falling loads") is one requirement inside 1926.651 Specific excavation requirements, an OSHA construction standard (Part 1926, Subpart P). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(e) Exposure to falling loads. No employee shall be permitted underneath loads handled by lifting or digging equipment. Employees shall be required to stand away from any vehicle being loaded or unloaded to avoid being struck by any spillage or falling materials. Operators may remain in the cabs of vehicles being loaded or unloaded when the vehicles are equipped, in accordance with § 1926.601(b)(6), to provide adequate protection for the operator during loading and unloading operations. 71 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.651.

See every company cited for this rule.

Export the list: 71 inspections cited 1926.651(e) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.651(e).

Employee is killed when crushed by falling manhole section
2024-09-24 · Fatal · HILLSBORO, OR

At 11:23 a.m. on September 24, 2024, Employee #1 was working inside a precast concrete manhole section that had been previously installed in an excavation. A second precast concrete manhole section, suspended above by rigging, came loose and fell approximately 9 feet. The falling load…

Where and how often it was cited

YearCitations
20235
202414
202528
202624

Top states: FL (10), TX (8), CO (7), IL (5), GA (3)

Largest penalties

EmployerLocationPenalty for this rule
317737921 - NORTHWEST EARTHMOVERS INCHILLSBORO, OR$30,984
M. O' HERRON COMPANYWEBSTER SPRINGS, WV$21,281
ELDER CORPORATIONWAUKEE, IA$20,000
MOUNTAIN CASCADE OF TEXAS LLCCELINA, TX$16,550
GEO TECHNOLOGY ASSOCIATES, INC.STATEN ISLAND, NY$13,240

Free toolbox talk

A 5-minute crew talk on 1926.651(e), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.651(e).

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Can workers stand under a load being lifted?

No. No employee shall be permitted underneath loads handled by lifting or digging equipment.

Where should workers stand when a truck is being loaded?

Away from the vehicle, to avoid being struck by spillage or falling materials.

Can the truck driver stay in the cab?

Yes, when the vehicle is equipped in accordance with 1926.601(b)(6) to protect the operator during loading and unloading.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top