29 CFR 1926 · Construction · Subpart P

1926.652(g)(1): Shield System Use in Excavations

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 16, 2026 3 min read

In plain words:

Employers must not load trench shields beyond what they were designed to withstand, and must install them to restrict sideways or other dangerous movement under sudden side loads. Workers must be protected from cave-ins when entering or leaving shielded areas, and may not be in shields while they are installed, removed or moved vertically.

Key takeaways

  • 1926.652(g)(1) is part of OSHA's construction standards (29 CFR Part 1926, Subpart P).
  • OSHA cited it 100 times in the last 3 years, in 91 inspections, with $659,437 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: TX (10), OH (10), IN (8).
  • Related part: 1926.652(g) Shield systems (137 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.652(g)(1) ↓

100citations, 3 years
$659,437current penalties
91inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.652(g)(1) ("General") is one requirement inside 1926.652 Requirements for protective systems, an OSHA construction standard (Part 1926, Subpart P). It includes 4 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(1) General. 100 citations

(i) Shield systems shall not be subjected to loads exceeding those which the system was designed to withstand. 1 citations

(ii) Shields shall be installed in a manner to restrict lateral or other hazardous movement of the shield in the event of the application of sudden lateral loads. Open (g)(1)(ii) 50 citations

(iii) Employees shall be protected from the hazard of cave-ins when entering or exiting the areas protected by shields. Open (g)(1)(iii) 45 citations

(iv) Employees shall not be allowed in shields when shields are being installed, removed, or moved vertically. Open (g)(1)(iv) 4 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.652.

See every company cited for this rule.

Export the list: 91 inspections cited 1926.652(g)(1) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1926.652(g)(1).

Employee is killed when crushed by falling manhole section
2024-09-24 · Fatal · HILLSBORO, OR

At 11:23 a.m. on September 24, 2024, Employee #1 was working inside a precast concrete manhole section that had been previously installed in an excavation. A second precast concrete manhole section, suspended above by rigging, came loose and fell approximately 9 feet. The falling load…

Where and how often it was cited

YearCitations
20237
202432
202539
202622

Top states: TX (10), OH (10), IN (8), WI (8), IL (6)

Largest penalties

EmployerLocationPenalty for this rule
SOUND CONSTRUCTION INC.STAMFORD, CT$165,514
PYLES PLUMBING AND UTILITY CONTRACTORS, INC.PERRY, GA$79,048
HURTADO CONSTRUCTION COMPANYFULSHEAR, TX$31,940
GEORGE & LYNCH, INC.MILLSBORO, DE$26,811
ELDER CORPORATIONWAUKEE, IA$20,000

Free toolbox talk

A 5-minute crew talk on 1926.652(g)(1), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.652(g)(1).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Can a trench box be loaded beyond its design?

No. Shields shall not be subjected to loads exceeding those they were designed to withstand.

Can workers stay in a shield while it is moved?

No. Employees shall not be allowed in shields while they are installed, removed or moved vertically.

What about getting in and out?

Employees must be protected from cave-ins when entering or exiting the shielded area.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top