1926.703(b)(8)(i): OSHA rule
Key takeaways
- 1926.703(b)(8)(i) is part of OSHA's construction standards (29 CFR Part 1926, Subpart Q).
- OSHA cited it 2 times in the last 3 years, in 2 inspections, with $22,550 in current penalties.
- Related part: 1926.703(b) Shoring and reshoring (16 citations).
- Free 5-minute toolbox talk for your crew below.
In this article
What this rule covers
29 CFR 1926.703(b)(8)(i) is one requirement inside 1926.703 Requirements for cast-in-place concrete, an OSHA construction standard (Part 1926, Subpart Q). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(i) The design of the shoring shall be prepared by a qualified designer and the erected shoring shall be inspected by an engineer qualified in structural design. 2 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1926.703.
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1926.703(b)(8)(i), plus alerts when this rule changes. Free.
OSHA interpretation letters
Related parts of this rule
- 1926.703(b) Shoring and reshoring 16 citations
- 1926.703(b)(8) 3 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey, Dana Reyes
Trainers and suppliers: feature your business on this rule for $25/month.
About this page
Sources
- 29 CFR 1926.703 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-10-20
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.