29 CFR 1910 · General Industry · Subpart S

1910.333(b)(2)(i): Written Electrical Lockout Procedures

By Black Belt Safety Editorial Team Official text as of octubre 15, 2026 Data updated octubre 20, 2026 3 min read

In plain words:

Employers must keep a written copy of the electrical lockout and tagging procedures in paragraph (b)(2) and make it available for inspection by employees and OSHA. The written procedures may be a copy of paragraph (b) of 1910.333.

Key takeaways

  • 1910.333(b)(2)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart S).
  • OSHA cited it 61 times in the last 3 years, in 61 inspections, with $105,497 in current penalties.
  • Most citations: CT (12), VA (6), KY (4).
  • Related part: 1910.333(b) Working on or near exposed deenergized parts (225 citations).
  • Free 5-minute toolbox talk for your crew below.
61citations, 3 years
$105,497current penalties
61inspections
0linked injury cases
In this article
  1. What this rule covers
  2. Official text
  3. Where and how often it was cited
  4. Free toolbox talk
  5. OSHA interpretation letters
  6. Related parts of this rule
  7. Get your crew competent
  8. Frequently asked questions
  9. About this page

What this rule covers

29 CFR 1910.333(b)(2)(i) ("Procedures") is one requirement inside 1910.333 Selection and use of work practices, an OSHA general industry standard (Part 1910, Subpart S). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Procedures. The employer shall maintain a written copy of the procedures outlined in paragraph (b)(2) and shall make it available for inspection by employees and by the Assistant Secretary of Labor and his or her authorized representatives. 61 citations

The written procedures may be in the form of a copy of paragraph (b) of this section.

Source: eCFR, text current as of 2026-10-15. Read all of 1910.333.

Where and how often it was cited

YearCitations
20232
202418
202529
202612

Top states: CT (12), VA (6), KY (4), OH (4), PA (3)

Largest penalties

EmployerLocationPenalty for this rule
MILLISON CASTING TECHNOLOGY, LLCSALLISAW, OK$16,550
INSPIRA MEDICAL CENTERS, INC.BRIDGETON, NJ$11,585
DMV ELECTRIC AND CONSTRUCTION INC.FAIRFAX, VA$10,765
GEO PREP MID-CITY, INC.BATON ROUGE, LA$10,000
TYSON POULTRY, INC.WALDRON, AR$8,276

Free toolbox talk

A 5-minute crew talk on 1910.333(b)(2)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.333(b)(2)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Must electrical lockout procedures be written?

Yes. The employer shall maintain a written copy of the procedures outlined in paragraph (b)(2).

Who can see the written procedures?

Employees and the Assistant Secretary of Labor and authorized representatives.

Can a copy of the rule serve as the procedure?

Yes. The written procedures may be in the form of a copy of paragraph (b) of 1910.333.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Desplácese hacia arriba