29 CFR 1910 · General Industry · Subpart I

1910.134(g)(1)(i): No Facial Hair or Seal Problems with Tight-Fitting Respirators

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employers must not allow workers to wear respirators with tight-fitting facepieces if they have facial hair that comes between the sealing surface and the face or interferes with the valves. The same applies to any other condition that interferes with the face-to-facepiece seal or valve function.

Key takeaways

  • 1910.134(g)(1)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart I).
  • OSHA cited it 606 times in the last 3 years, in 594 inspections, with $837,434 in current penalties.
  • 3 deaths are linked to inspections that cited this rule.
  • Most citations: TN (45), IL (43), MI (41).
  • Related part: 1910.134(g) Use of respirators (679 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.134(g)(1)(i) ↓

606citations, 3 years
$837,434current penalties
594inspections
3linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.134(g)(1)(i) is one requirement inside 1910.134 Respiratory protection, an OSHA general industry standard (Part 1910, Subpart I). It includes 2 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) The employer shall not permit respirators with tight-fitting facepieces to be worn by employees who have: 606 citations

(A) Facial hair that comes between the sealing surface of the facepiece and the face or that interferes with valve function; or Open (g)(1)(i)(a) 524 citations

(B) Any condition that interferes with the face-to-facepiece seal or valve function. Open (g)(1)(i)(b) 23 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.134.

See every company cited for this rule.

Export the list: 594 inspections cited 1910.134(g)(1)(i) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

3 deaths are linked to inspections where OSHA cited 1910.134(g)(1)(i).

Employee is found unresponsive after complaining of chest pa
2024-08-29 · Fatal · LOUISBURG, NC

At 12:00 a.m. on August 29, 2024, Employee #1, a material handler at a steel fabrication facility, was taking his morning break in the breakroom. Upon returning to work after the break, he began complaining of trouble breathing andchest pain. He called 911, and a…

See all 3 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
202320
2024247
2025189
2026150

Top states: TN (45), IL (43), MI (41), NC (39), OH (32)

Largest penalties

EmployerLocationPenalty for this rule
CRASH CHAMPIONS COLLISION REPAIRSAN ANTONIO, TX$53,500
STRATEGIC MATERIALS, INCMIDLOTHIAN, TX$42,000
CRASH CHAMPIONS, LLCALLENTOWN, PA$35,466
CALIBER HOLDINGS LLCLAS VEGAS, NV$35,465
CRASH CHAMPIONS COLLISION REPAIR INGRAMSAN ANTONIO, TX$23,045

Free toolbox talk

A 5-minute crew talk on 1910.134(g)(1)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.134(g)(1)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Does this mean all facial hair is banned?

No. It applies to facial hair that comes between the facepiece sealing surface and the face or that interferes with valve function.

What other conditions count?

Any condition that interferes with the face-to-facepiece seal or valve function.

Does this apply to loose-fitting respirators?

This paragraph applies to respirators with tight-fitting facepieces.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top