29 CFR 1910 · General Industry · Subpart N

1910.179(b)(8): Only Designated Personnel Operate Cranes

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 22, 2026 2 min read

In plain words:

Employers must permit only designated personnel to operate overhead and gantry cranes covered by this section.

Key takeaways

  • 1910.179(b)(8) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart N).
  • OSHA cited it 11 times in the last 3 years, in 11 inspections, with $48,454 in current penalties.
  • 1 death is linked to inspections that cited this rule.
  • Most citations: TX (3), NY (2), ID (1).
  • Related part: 1910.179(b) General requirements (57 citations).
  • Free 5-minute toolbox talk for your crew below.
11citations, 3 years
$48,454current penalties
11inspections
1linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.179(b)(8) ("Designated personnel") is one requirement inside 1910.179 Overhead and gantry cranes, an OSHA general industry standard (Part 1910, Subpart N). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(8) Designated personnel —Only designated personnel shall be permitted to operate a crane covered by this section. 11 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.179.

Injuries linked to this rule

1 death is linked to inspections where OSHA cited 1910.179(b)(8).

Employee dies while moving load and crushed by falling windo
2024-04-18 · Fatal · SAN ANTONIO, TX

At 8:40 a.m. on April 18, 2024, an employee working for a glass and glazing contractor was attempting to maneuver a 3-ton overhead crane to unsecured windowframes. The window frames were staged in for metal fabrication prep in the assembly area. While moving one of…

Where and how often it was cited

YearCitations
20245
20253
20263

Top states: TX (3), NY (2), ID (1), MA (1), AL (1)

Largest penalties

EmployerLocationPenalty for this rule
ARROWALL COMPANYSAN ANTONIO, TX$12,000
MARMON RETAIL SOLUTIONSWAGONER, OK$9,457
HEIDELBERG MATERIALS US CEMENT LLCCATSKILL, NY$8,067
MONARCH STEEL OF ALABAMA, INC.DECATUR, AL$4,966
MET WELD INTERNATIONAL, LLCALTAMONT, NY$4,840

Free toolbox talk

A 5-minute crew talk on 1910.179(b)(8), plus alerts when this rule changes. Free.




OSHA interpretation letters

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who can operate an overhead crane?

Only designated personnel.

Which cranes does this cover?

Overhead and gantry cranes covered by 1910.179.

Can any trained worker run the crane?

Only if they are designated personnel.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top