1910.268(q)(2)(i): Close Inspection Before Tree Work
Employers must make sure the employee and the foreman or supervisor closely inspect a tree before anyone climbs, enters or works around it, to find out if a power conductor passes through it or within reaching distance. If so, an electrical hazard is considered to exist unless the system operator/owner has deenergized the lines or installed protective equipment.
Key takeaways
- 1910.268(q)(2)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart R).
- OSHA cited it 1 times in the last 3 years, in 1 inspections, with $7,000 in current penalties.
- 1 death is linked to inspections that cited this rule.
- Related part: 1910.268(q) Tree trimming (2 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.268(q)(2)(i) ↓
In this article
What this rule covers
29 CFR 1910.268(q)(2)(i) is one requirement inside 1910.268 Telecommunications, an OSHA general industry standard (Part 1910, Subpart R). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(i) Employers shall ensure that a close inspection is made by the employee and by the foremen or supervisor in charge before climbing, entering, or working around any tree, to determine whether an electrical power conductor passes through the tree, or passes within reaching distance of an employee working in the tree. If any of these conditions exist either directly or indirectly, an electrical hazard shall be considered to exist unless the system operator/owner has caused the hazard to be removed by deenergizing the lines, or installing protective equipment. 1 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.268.
Export the list: 1 inspections cited 1910.268(q)(2)(i) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moInjuries linked to this rule
1 death is linked to inspections where OSHA cited 1910.268(q)(2)(i).
At 1:30 p.m. on August 3, 2024, an employee was in a vehicle-mounted boom lift, cutting tree branches that were adjacent to an electric/fiberoptic line pole. A portion of the tree was in contact with the energized electric line. As the employee was cutting a…
Where and how often it was cited
Free toolbox talk
A 5-minute crew talk on 1910.268(q)(2)(i), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.268(q)(2)(i).
Related parts of this rule
- 1910.268(q) Tree trimming 2 citations
- 1910.268(q)(1)(ii) 1 citations
- 1910.268(q)(2) Working in proximity to electrical hazards 1 citations
- 1910.268(q)(1) General 1 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
When must the inspection be done?
Before climbing, entering or working around any tree.
What is the inspection looking for?
Whether an electrical power conductor passes through the tree or within reaching distance of an employee working in it.
When is the electrical hazard considered removed?
When the system operator/owner has deenergized the lines or installed protective equipment.
About this page
Sources
- 29 CFR 1910.268 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
