1910.212(a)(3)(iv): Machines That Usually Need Point of Operation Guards
This rule lists machines that usually require point of operation guarding: guillotine cutters, shears, alligator shears, power presses, milling machines, power saws, jointers, portable power tools, and forming rolls and calenders.
Key takeaways
- 1910.212(a)(3)(iv) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart O).
- OSHA cited it 40 times in the last 3 years, in 39 inspections, with $147,657 in current penalties.
- Most citations: PA (10), FL (5), TX (4).
- Related part: 1910.212(a) Machine guarding (6,843 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.212(a)(3)(iv) ↓
In this article
What this rule covers
29 CFR 1910.212(a)(3)(iv) is one requirement inside 1910.212 General requirements for all machines, an OSHA general industry standard (Part 1910, Subpart O). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(iv) The following are some of the machines which usually require point of operation guarding: 40 citations
(a) Guillotine cutters.
(b) Shears.
(c) Alligator shears.
(d) Power presses.
(e) Milling machines.
(f) Power saws.
(g) Jointers.
(h) Portable power tools.
(i) Forming rolls and calenders.
Source: eCFR, text current as of 2026-10-15. Read all of 1910.212.
Export the list: 39 inspections cited 1910.212(a)(3)(iv) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moWhere and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 3 |
| 2024 | 14 |
| 2025 | 16 |
| 2026 | 7 |
Top states: PA (10), FL (5), TX (4), IL (3), VA (3)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| LAKESIDE FOODS, INC. | NEW RICHMOND, WI | $14,518 |
| LOCKHEED MARTIN CORPORATION | OLDSMAR, FL | $13,394 |
| MAR-BAL, INC. | DUBLIN, VA | $12,300 |
| INTERAMERICA STAGE INC | SANFORD, FL | $11,916 |
| PACKAGING CORPORATION OF AMERICA | DERIDDER, LA | $10,215 |
Free toolbox talk
A 5-minute crew talk on 1910.212(a)(3)(iv), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.212(a)(3)(iv).
Related parts of this rule
- 1910.212(a) Machine guarding 6,843 citations
- 1910.212(a)(1) Types of guarding 4,631 citations
- 1910.212(a)(3) Point of operation guarding 1,833 citations
- 1910.212(a)(3)(ii) 1,648 citations
- 1910.212(a)(2) General requirements for machine guards 217 citations
- 1910.212(a)(5) Exposure of blades 120 citations
- 1910.212(a)(3)(iii) 115 citations
- 1910.212(a)(4) Barrels, containers, and drums 28 citations
- 1910.212(a)(3)(i) 20 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
Which machines usually need point of operation guarding?
Guillotine cutters, shears, alligator shears, power presses, milling machines, power saws, jointers, portable power tools, and forming rolls and calenders.
Is this list complete?
No. The rule says these are some of the machines which usually require point of operation guarding.
Are portable power tools on the list?
Yes. Portable power tools are listed among the machines that usually require point of operation guarding.
About this page
Sources
- 29 CFR 1910.212 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
