1910.212(a)(4): Interlocked Guards on Revolving Drums
Employers must guard revolving drums, barrels and containers with an enclosure interlocked with the drive, so the drum, barrel or container cannot turn unless the guard enclosure is in place.
Key takeaways
- 1910.212(a)(4) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart O).
- OSHA cited it 28 times in the last 3 years, in 28 inspections, with $95,526 in current penalties.
- Most citations: WI (4), PA (4), CT (4).
- Related part: 1910.212(a) Machine guarding (6,843 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.212(a)(4) ↓
In this article
What this rule covers
29 CFR 1910.212(a)(4) ("Barrels, containers, and drums") is one requirement inside 1910.212 General requirements for all machines, an OSHA general industry standard (Part 1910, Subpart O). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(4) Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place. 28 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.212.
Export the list: 28 inspections cited 1910.212(a)(4) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moWhere and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 1 |
| 2024 | 15 |
| 2025 | 9 |
| 2026 | 3 |
Top states: WI (4), PA (4), CT (4), MA (2), MN (2)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| 156029 - ZIPS CAR WASH, LLC | GREENSBORO, NC | $15,625 |
| PIANA NONWOVENS, LLC | CARTERSVILLE, GA | $14,518 |
| RHE HATCO, INC. | LONGVIEW, TX | $9,102 |
| WIRE AND CABLE SPECIALTIES, INC. | COATESVILLE, PA | $8,469 |
| PLAYTEX MANUFACTURING INC. | DOVER, DE | $8,067 |
Free toolbox talk
A 5-minute crew talk on 1910.212(a)(4), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.212(a)(4).
Related parts of this rule
- 1910.212(a) Machine guarding 6,843 citations
- 1910.212(a)(1) Types of guarding 4,631 citations
- 1910.212(a)(3) Point of operation guarding 1,833 citations
- 1910.212(a)(3)(ii) 1,648 citations
- 1910.212(a)(2) General requirements for machine guards 217 citations
- 1910.212(a)(5) Exposure of blades 120 citations
- 1910.212(a)(3)(iii) 115 citations
- 1910.212(a)(3)(iv) 40 citations
- 1910.212(a)(3)(i) 20 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
How must revolving drums be guarded?
By an enclosure interlocked with the drive mechanism.
What does the interlock do?
It keeps the barrel, drum or container from revolving unless the guard enclosure is in place.
Does this cover containers too?
Yes. It applies to revolving drums, barrels and containers.
About this page
Sources
- 29 CFR 1910.212 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
