29 CFR 1910 · General Industry · Subpart S

1910.333(c)(2): Only Qualified Persons on Energized Equipment

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Only qualified persons may work on electric circuit parts or equipment that have not been deenergized under paragraph (b). They must be capable of working safely on energized circuits and familiar with special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools.

Key takeaways

  • 1910.333(c)(2) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart S).
  • OSHA cited it 51 times in the last 3 years, in 51 inspections, with $171,689 in current penalties.
  • 2 deaths are linked to inspections that cited this rule.
  • Most citations: NC (11), PA (5), TX (4).
  • Related part: 1910.333(c) Working on or near exposed energized parts (192 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.333(c)(2) ↓

51citations, 3 years
$171,689current penalties
51inspections
2linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.333(c)(2) ("Work on energized equipment") is one requirement inside 1910.333 Selection and use of work practices, an OSHA general industry standard (Part 1910, Subpart S). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(2) Work on energized equipment. Only qualified persons may work on electric circuit parts or equipment that have not been deenergized under the procedures of paragraph (b) of this section. Such persons shall be capable of working safely on energized circuits and shall be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools. 51 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.333.

See every company cited for this rule.

Export the list: 51 inspections cited 1910.333(c)(2) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

2 deaths are linked to inspections where OSHA cited 1910.333(c)(2).

Employee dies when electrocuted inside water treatment plant
2024-07-21 · Fatal · WESLEYAN COLLEGE, NC

On July 21, 2024, an employee working for a water treatment plant was troubleshooting an electrical float valve inside a treatment tank. The employee contacted live electrical wiring and was shocked. The employee died due to electrocution.

See all 2 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20232
202423
202512
202614

Top states: NC (11), PA (5), TX (4), NY (4), MA (3)

Largest penalties

EmployerLocationPenalty for this rule
UPS INSTRUMENT & ELECTRICAL SERVICES, LLCTULSA, OK$16,131
157152 - CITY OF ROCKY MOUNT - TAR WATER TREATMENT PLANTWESLEYAN COLLEGE, NC$16,131
KEECO, LLCDALLAS, TX$13,631
FIRSTAR FIBER, INC.OMAHA, NE$11,585
VIANT COLLEGEVILLE, LLCCOLLEGEVILLE, PA$10,641

Free toolbox talk

A 5-minute crew talk on 1910.333(c)(2), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.333(c)(2).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who can work on energized equipment?

Only qualified persons.

What must qualified persons know?

Special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools.

What counts as energized here?

Circuit parts or equipment that have not been deenergized under paragraph (b) of 1910.333.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top