29 CFR 1910 · General Industry · Subpart S

1910.333(c)(6): Handling Conductive Materials Near Live Parts

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employers must make sure conductive materials and equipment in contact with any part of an employee's body are handled so they do not contact exposed energized conductors or circuit parts. When long conductive objects like ducts and pipes are handled near exposed live parts, the employer must set work practices such as insulation, guarding and material handling techniques to minimize the hazard.

Key takeaways

  • 1910.333(c)(6) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart S).
  • OSHA cited it 8 times in the last 3 years, in 8 inspections, with $31,445 in current penalties.
  • 3 deaths are linked to inspections that cited this rule.
  • Related part: 1910.333(c) Working on or near exposed energized parts (192 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1910.333(c)(6) ↓

8citations, 3 years
$31,445current penalties
8inspections
3linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.333(c)(6) ("Conductive materials and equipment") is one requirement inside 1910.333 Selection and use of work practices, an OSHA general industry standard (Part 1910, Subpart S). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(6) Conductive materials and equipment. Conductive materials and equipment that are in contact with any part of an employee's body shall be handled in a manner that will prevent them from contacting exposed energized conductors or circuit parts. If an employee must handle long dimensional conductive objects (such as ducts and pipes) in areas with exposed live parts, the employer shall institute work practices (such as the use of insulation, guarding, and material handling techniques) which will minimize the hazard. 8 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.333.

See every company cited for this rule.

Export the list: 8 inspections cited 1910.333(c)(6) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

3 deaths are linked to inspections where OSHA cited 1910.333(c)(6).

Employee is electrocuted while cutting limbs, caught pole sa
2024-07-30 · Fatal · BRADENTON, FL

At 1:00 p.m. on July 30, 2024, Employee #1, employed by a tree trimming company,was using a pole saw to cut limbs. While lifting the pole saw, it made contact with an overhead power line, resulting in electrocution. Emergency services responded to the scene, but…

See all 3 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

Free toolbox talk

A 5-minute crew talk on 1910.333(c)(6), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.333(c)(6).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

What does this rule cover?

Conductive materials and equipment in contact with any part of an employee's body.

What about long pipes or ducts?

The employer must set work practices such as insulation, guarding and material handling techniques to minimize the hazard.

What is the main goal?

To keep conductive objects from contacting exposed energized conductors or circuit parts.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top