29 CFR 1926 · Construction · Subpart X

1926.1053(b)(5)(i): Angle for Non-Self-Supporting Ladders

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated November 17, 2026 3 min read

In plain words:

Employees must use non-self-supporting ladders at an angle where the horizontal distance from the top support to the foot is approximately one-quarter of the working length, meaning the distance along the ladder between the foot and the top support.

Key takeaways

  • 1926.1053(b)(5)(i) is part of OSHA's construction standards (29 CFR Part 1926, Subpart X).
  • OSHA cited it 217 times in the last 3 years, in 216 inspections, with $336,351 in current penalties.
  • 3 deaths are linked to inspections that cited this rule.
  • Most citations: MD (45), VA (23), FL (15).
  • Related part: 1926.1053(b) Use (10,104 citations).
  • Free 5-minute toolbox talk for your crew below.

Get the free 5-minute toolbox talk on 1926.1053(b)(5)(i) ↓

217citations, 3 years
$336,351current penalties
216inspections
3linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1926.1053(b)(5)(i) is one requirement inside 1926.1053 Ladders, an OSHA construction standard (Part 1926, Subpart X). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(i) Non-self-supporting ladders shall be used at an angle such that the horizontal distance from the top support to the foot of the ladder is approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support). 217 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1926.1053.

See every company cited for this rule.

Export the list: 216 inspections cited 1926.1053(b)(5)(i) in the last 3 years, with employer, location, penalty and date.

Purple Belt, $59/mo

Injuries linked to this rule

3 deaths are linked to inspections where OSHA cited 1926.1053(b)(5)(i).

Employee falls from tubular frame scaffold and sustains mult
2024-12-24 · Fatal · LINCOLNWOOD, IL

At 1:00 p.m. on December 24, 2024, Employee #1, a masonry contractor and site foreman, was working on a tubular frame welded scaffold at a new residential construction site in Lincolnwood, Illinois. While directing three other employees installing a brick fa�ade, he fell from the…

See all 3 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
20234
202489
202574
202650

Top states: MD (45), VA (23), FL (15), MA (12), OR (11)

Largest penalties

EmployerLocationPenalty for this rule
J.S ALDO'S CONSTRUCTION CO, INC.MAYWOOD, NJ$16,550
LUIS ALBERTO-REYNA AVILA, AKA LUIS REYNA AVILASCRANTON, PA$13,005
SHIRLEY CONTRACTING COMPANY, LLCHAMPTON, VA$9,356
C. STERLING QUALITY ROOFING, INC.LAND O LAKES, FL$9,268
IWR NORTH AMERICA, LLCSAINT LOUIS, MO$8,937

Free toolbox talk

A 5-minute crew talk on 1926.1053(b)(5)(i), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1926.1053(b)(5)(i).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

How far should the base of a leaning ladder be from the wall?

Approximately one-quarter of the working length of the ladder.

How is working length measured?

Along the ladder between the foot and the top support.

Does this apply to stepladders?

It applies to non-self-supporting ladders, which lean against a support.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top