29 CFR 1910 · General Industry · Subpart J

1910.147(c)(7)(i)(B): Train Affected Employees on Lockout

By Black Belt Safety Editorial Team Official text as of October 15, 2026 Data updated October 20, 2026 2 min read

In plain words:

Each affected employee must be instructed in the purpose and use of the energy control procedure.

Key takeaways

  • 1910.147(c)(7)(i)(B) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart J).
  • OSHA cited it 166 times in the last 3 years, in 166 inspections, with $489,367 in current penalties.
  • 3 deaths are linked to inspections that cited this rule.
  • Most citations: NC (28), WI (18), PA (14).
  • Related part: 1910.147(c) General (11,187 citations).
  • Free 5-minute toolbox talk for your crew below.
166citations, 3 years
$489,367current penalties
166inspections
3linked deaths
In this article
  1. What this rule covers
  2. Official text
  3. Injuries linked to this rule
  4. Where and how often it was cited
  5. Free toolbox talk
  6. OSHA interpretation letters
  7. Related parts of this rule
  8. Get your crew competent
  9. Frequently asked questions
  10. About this page

What this rule covers

29 CFR 1910.147(c)(7)(i)(B) is one requirement inside 1910.147 The control of hazardous energy (lockout/tagout), an OSHA general industry standard (Part 1910, Subpart J). The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.

Official text

(B) Each affected employee shall be instructed in the purpose and use of the energy control procedure. 166 citations

Source: eCFR, text current as of 2026-10-15. Read all of 1910.147.

Injuries linked to this rule

3 deaths are linked to inspections where OSHA cited 1910.147(c)(7)(i)(B).

Employee dies from head injuries when caught in energized ma
2024-06-07 · Fatal · SAN ANTONIO, TX

At 11:00 a.m. on June 7, 2024, an employee working as a machinery maintenance technician for a frozen food manufacturer was troubleshooting a ring remover since food trays were getting stuck. The employee bypassed the magnetic safety interlock gates and crawled underneath the conveyor. A…

See all 3 cases

Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).

Unlock with Purple Belt

Where and how often it was cited

YearCitations
202314
202459
202556
202637

Top states: NC (28), WI (18), PA (14), TX (11), TN (9)

Largest penalties

EmployerLocationPenalty for this rule
FLORENCE HARDWOODS, LLCFLORENCE, WI$137,508
SEALY, INC.ORLANDO, FL$16,550
BEYOND MEATDEVAULT, PA$16,131
DISTRICT COUNCIL OF MADISON, INC. SOCIETY OF ST. VINCENT DE PAULMADISON, WI$16,131
COTTON HOLDINGS INC.SAN ANTONIO, TX$16,131

Free toolbox talk

A 5-minute crew talk on 1910.147(c)(7)(i)(B), plus alerts when this rule changes. Free.




OSHA interpretation letters

None exist. OSHA has not published a letter of interpretation for 1910.147(c)(7)(i)(B).

Related parts of this rule

Get your crew competent

Trainers on Black Belt Safety: Marc Harvey, Dana Reyes

Trainers and suppliers: feature your business on this rule for $25/month.

Frequently asked questions

Who must receive this instruction?

Each affected employee.

What must they be taught?

The purpose and use of the energy control procedure.

Is this the same as authorized employee training?

No. This paragraph covers instruction for affected employees on the purpose and use of the procedure.

About this page

Sources

3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.

Written and reviewed by

Black Belt Safety Editorial Team

Site Safety Officer and Safety Professional

OSHA 30 · CPR · USACE CQM

Written and reviewed by the Black Belt Safety team. Every post is checked against the OSHA standard or agency source it cites.

Scroll to top