1910.147(c)(7)(i): Who gets which lockout/tagout training
Employers must train employees so they understand the purpose and function of the energy control program and have the knowledge and skills to safely apply, use and remove energy controls. Authorized employees are trained to recognize hazardous energy sources, the type and magnitude of energy in the workplace, and how to isolate and control it. Affected employees are instructed in the purpose and use of the energy control procedure. All other employees who work, or may work, where energy control is used are instructed about the procedure and that they must never try to restart or re-energize equipment that is locked or tagged out.
Key takeaways
- 1910.147(c)(7)(i) is part of OSHA's general industry standards (29 CFR Part 1910, Subpart J).
- OSHA cited it 2,378 times in the last 3 years, in 2,278 inspections, with $9,393,918 in current penalties.
- 30 deaths are linked to inspections that cited this rule.
- Most citations: MI (401), OH (209), IL (170).
- Related part: 1910.147(c) General (11,358 citations).
- Free 5-minute toolbox talk for your crew below.
Get the free 5-minute toolbox talk on 1910.147(c)(7)(i) ↓
In this article
What this rule covers
29 CFR 1910.147(c)(7)(i) is one requirement inside 1910.147 The control of hazardous energy (lockout/tagout), an OSHA general industry standard (Part 1910, Subpart J). It includes 3 sub-paragraphs. The official text below is copied word for word from the Electronic Code of Federal Regulations (eCFR). The numbers, injury cases and training on this page show how OSHA enforces it on real job sites.
Official text
(i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following: 2,378 citations
(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control. Open (c)(7)(i)(a) 960 citations
(B) Each affected employee shall be instructed in the purpose and use of the energy control procedure. Open (c)(7)(i)(b) 167 citations
(C) All other employees whose work operations are or may be in an area where energy control procedures may be utilized, shall be instructed about the procedure, and about the prohibition relating to attempts to restart or reenergize machines or equipment which are locked out or tagged out. Open (c)(7)(i)(c) 21 citations
Source: eCFR, text current as of 2026-10-15. Read all of 1910.147.
Export the list: 2,278 inspections cited 1910.147(c)(7)(i) in the last 3 years, with employer, location, penalty and date.
Purple Belt, $59/moInjuries linked to this rule
30 deaths are linked to inspections where OSHA cited 1910.147(c)(7)(i).
At approximately 1:00 p.m. on December 10, 2024, an employee was operating a powered industrial truck in the yard. The forklift overturned and landed on top of the operator, causing fatal mechanical asphyxiation and blunt force trauma.
Full case list with employer, penalty, filters and download is part of OSHA Data (Purple Belt).
Unlock with Purple BeltWhere and how often it was cited
| Year | Citations |
|---|---|
| 2023 | 84 |
| 2024 | 850 |
| 2025 | 774 |
| 2026 | 670 |
Top states: MI (401), OH (209), IL (170), WI (164), NY (144)
Largest penalties
| Employer | Location | Penalty for this rule |
|---|---|---|
| MDLG, INC. | PHENIX CITY, AL | $483,969 |
| FLORENCE HARDWOODS, LLC | FLORENCE, WI | $275,016 |
| FUYAO GLASS AMERICA INC. | MORAINE, OH | $165,514 |
| LOVING PETS CORPORATION | PENNS GROVE, NJ | $165,514 |
| CLEVELAND STEEL CONTAINER CORPORATION | PEOTONE, IL | $141,876 |
Free toolbox talk
A 5-minute crew talk on 1910.147(c)(7)(i), plus alerts when this rule changes. Free.
OSHA interpretation letters
None exist. OSHA has not published a letter of interpretation for 1910.147(c)(7)(i).
Related parts of this rule
- 1910.147(c) General 11,358 citations
- 1910.147(c)(4) Energy control procedure 4,172 citations
- 1910.147(c)(4)(i) 3,020 citations
- 1910.147(c)(7) Training and communication 2,785 citations
- 1910.147(c)(6) Periodic inspection 2,488 citations
- 1910.147(c)(6)(i) 2,066 citations
- 1910.147(c)(1) Energy control program 1,478 citations
- 1910.147(c)(4)(ii) 1,147 citations
- 1910.147(c)(7)(i)(A) 960 citations
- 1910.147(c)(6)(ii) 408 citations
- 1910.147(c)(5) Protective materials and hardware 346 citations
- 1910.147(c)(7)(iv) 311 citations
Get your crew competent
Trainers on Black Belt Safety: Marc Harvey
Trainers and suppliers: feature your business on this rule for $25/month.
Frequently asked questions
What training do authorized employees need?
Recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means needed to isolate and control it.
Do employees who never lock out need training?
Yes. Affected employees must be instructed in the purpose and use of the procedure, and other employees working in the area must be told about the procedure and the ban on restarting locked- or tagged-out equipment.
About this page
Sources
- 29 CFR 1910.147 (eCFR), text current as of 2026-10-15
- U.S. Department of Labor enforcement data: OSHA inspections, citations and accident records, copied nightly; data as of 2026-11-17
3-year window. Federal OSHA only; state-plan rules are not counted. Plain-language text is a summary, not legal advice; the official text controls. Black Belt Safety is not part of OSHA or the Department of Labor.
